Installing a 12 volt eutectic refrigeration system has never been easier, a simple DIY project

Left: Typical installation.  This 150 Lt fridge consumes approx. 12 AH /day and approx. 25 AH /day in the tropics.

Right: Cut-away depicts a single eutectic plate coupled to a remote 12v refrigeration unit. One eutectic plate is usually adequate for well insulated top opening fridge cabinets (+1C to +4C) up to 300 litre capacity.

Uses up to 47% less battery power.... 

See why here:   Why Eutectic?

Below:   Correctly sized systems are supplied direct as complete pre-gassed DIY kits:
AW480 P53-35-6 LS Pump kit.jpg

Above:  Package 3AW. Air & water cooled 12VDC refrigeration unit coupled to 'Landscape' P53-35-60 Eutectic plate.                     (Click on picture to expand)

Plate size is 350H x 530W x *60mm thickness overall.  *Optional 40mm. 

  See all   System Kits.

Right:  Package 3A.

An A480 air cooled 12VDC refrigeration unit  with 'Portrait' P53-35-60 Eutectic plate.


'Portrait' Plate size is 530H x 350W x *60 thickness overall. 


Note: Both Portrait and Landscape plates can be supplied as 40mm thickness overall.

A480 - P53-35-6.png

 See all   System Kits. 

 Made in Australia by Ozefridge Industries Pty Ltd.

A.B.N. 51 113 406 447  ARC. AU13246

4423 MV Highway, Yarroweyah Victoria 3644

Ph: 0358732114  Email:

We recommend that every system be engineered to maintain required temperature in the situation nominated without exceeding a 50% duty cycle. 

Prior to supply we do a no cost, obligation free, 'Heat load, Run time %, and Power consumption' estimate for each project.   


See:  System Estimating. 

We sell direct to you.    See Australian and USA pricing here:   System Kits

Australian dispatch via TNT express to your address.  Daily dispatch also to USA / Canada addresses via UPS air express courier.