Installing a 12 volt refrigeration system, a simple DIY project.
Left: Typical installation. This 150 Lt fridge consumes approx. 12 AH /day @ 12.5VDC and approx. 25 AH /day in the tropics using a mid sized Eutectic Hold-over system.
Right: Cut-away depicts a single eutectic plate coupled to a remote 12v refrigeration unit. One eutectic plate is usually adequate for well insulated top opening fridge cabinets (+1C to +4C) up to 300 litre capacity.
THREE Refrigeration System Options:
< ONE: Cyclic Stainless Steel cold plate.
Custom made cold plate to suit individual cabinet interior shape / dimensions and coupled to either an Ozefridge A480 air cooled or AW480 air & water cooled 12 VDC condensing unit.
Fabricated from stainless steel and copper tubing. (No aluminium tubing or aluminium cold plates used!)
With a robust stainless steel cold plate evaporator surface and only copper tubing refrigerant galleries, loss of gas / system due to puncturing or corrosion is eliminated.
While most suitable for freezers and odd shaped cabinets, these Cyclic systems are the least power efficient and require a constant supply of 12VDC power.
Each of these 'one of' projects is separately costed once design and equipment requirements are known.
The refrigeration condensing unit can be located several meters away from the cabinet.
Cyclic Stainless Steel cold plate package.
TWO: Cyclic Forced Air.. >
The fastest cool down system and suits fridge cabinets (+2C) of up to 400 litre capacity.
(Will freeze but NOT suitable for deep freezer use)
Cabinet air is drawn in via perforated front, refrigerated then exits each side to circulate and rapidly cool cabinet interior and products.
Coupled to either an A480 air cooled only or an AW480 air and water cooled condensing unit, this package suits short term users requiring fast refrigeration and product cooling.
See all System Kits.
< THREE: Eutectic Hold-over
Deserving of it's reputation as the ultimate refrigeration system for long term marine and off grid use.
This systems superior power efficiency and its ability to store thermal energy when power is abundant, usually eliminating the need for extra battery storage, makes it the choice when only the best will do!
Available in a range of eutectic plate sizes for either 'landscape, as pictured, or portrait mounting. the eutectic system is ideal for long term use.
Coupled to either an A480 air cooled only or an AW480 air and water cooled condensing unit,
(Pictured has optional remote controller panel kit)
See why here: Why Eutectic?
Made in Australia by Ozefridge Industries Pty Ltd.
A.B.N. 51 113 406 447 ARC. AU13246
4423 MV Highway, Yarroweyah Victoria 3644
Ph: 0358732114 Email: email@example.com
See: Contact Ozefridge
IMPORTANT: We recommend that every system be engineered to maintain required temperature in the situation nominated without exceeding a 50% duty cycle.
IMPORTANT: Prior to supply we do a no cost, a 'Heat load, Run time %, and Power consumption' estimate for each project to establish system suitability and power requirements.
See: System Estimating.
We sell direct to you at prices much less than similar products. See Australian and USA pricing here: System Kits
*Shipping: *Goods are shipped FOB Origin. Shipping can be arranged by Ozefridge on behalf of the purchaser, and insurance arranged.
Alternatively purchasers may choose to arrange their own shipping.
Australian dispatch can be via Star Track express to your address.
Daily dispatch to USA / Canada addresses via UPS air express courier can be arranged.
Most system packages can be ready to ship within 72hours!